QBLPOWER 9.6V 1500mAh NiMH Rechargeable Battery Pack with Tamiya Connector for RC Cars, Boats, and Robots

This QBLPOWER 9.6V 1500mAh NiMH rechargeable battery pack delivers reliable power for a range of remote-controlled hobbies. With a built-in standard Tamiya connector and eight AA-sized cells, it’s designed to fit many RC cars, boats, and robots that require a 9.6V source. The pack measures approximately 100x56x14mm and weighs less than many alternatives, making it easy to install in tight compartments.

What Dimensions and Chemistry Does This Battery Pack Use?

The battery pack is built from eight NiMH AA cells wired in series to achieve 9.6V. It has a capacity of 1500mAh, providing a decent runtime for moderate use. The physical size is roughly 100mm long, 56mm wide, and 14mm thick (3.94 x 2.2 x 0.55 inches). The chemistry is Nickel-Metal Hydride (NiMH), which is common in hobby-grade rechargeables because it holds a charge well and handles frequent recharges without developing a memory effect.

Compatibility: Which Models Work with This Tamiya Plug Pack?

The pack uses a standard Tamiya connector (the two-prong flat male plug). Before purchasing, confirm that your device or battery tray uses the same connector. This battery is reported to work with many hobby units such as RC monster trucks, Lionel Polar Express trains, Tonka Ricochet RC trucks, RC Beetles, Traxx Tyco cars, Radio Shack RC cars, and Nikko RC cars. It’s also suitable for some robots and boats that accept a 9.6V NiMH pack with a Tamiya plug.

How Does the No-Memory-Effect Benefit You?

NiMH batteries like this one do not suffer from the memory effect that older chemistries (NiCd) had. You can recharge the pack at any state of discharge without reducing its maximum capacity. This means you can top it off between runs without needing to fully drain it first. The pack requires minimal maintenance—just keep it charged when not in use and store it in a cool, dry place.

Frequently Asked Questions

Can I charge this battery with any NiMH charger?

Most NiMH chargers that support a 9.6V pack and have a Tamiya connector will work. However, always check the charger’s specifications to ensure it matches the battery’s voltage and chemistry.

How long does it take to charge fully?

The charging time depends on the charger’s output current. For example, a 500mA charger would take about 3 hours for a full charge. The supplied data does not specify a recommended charge rate, so follow your charger’s instructions.

Will this battery work in my Traxxas RC car?

If your Traxxas model uses a 9.6V NiMH pack with a Tamiya connector, it should fit. Many older Traxxas cars use a different connector (Traxxas High-Current), so check your plug before buying.

What is the weight of this battery pack?

The exact weight is not listed, but eight AA NiMH cells typically weigh around 160-200 grams. The pack is relatively lightweight for its voltage.