INJORA Pre-Mounted Pin Buggy Tires & Wheels for 1/24 Losi Micro-B (Yellow, 4-Pack)
INJORA Pre-Mounted Pin Buggy Tires & Wheels for 1/24 Losi Micro-B (Yellow, 4-Pack)
The INJORA Pre-Mounted Pin Buggy Tires & Wheels are a drop-in upgrade for 1/24 Losi Micro-B owners looking for better traction and a scale look. This 4-pack includes two different sizes: a pair measuring 34x11mm and another pair at 35x17.8mm, each with a 7mm hex. The wheels are molded in yellow and use a micro pin tread pattern along with INJORA's B1 rubber compound to improve grip on loose dirt, gravel, and pavement. Each tire comes pre-mounted on a lightweight one-piece nylon wheel with a foam insert already installed, so you can swap them onto your Micro-B in minutes without glue or extra parts.
What's in the package?
You get four complete units: two 34x11mm tires (4g each) and two 35x17.8mm tires (5.3g each). Each tire is pre-mounted on a yellow nylon wheel with a 7mm hex, and includes a foam insert. No additional hardware or adhesive is needed for installation.
How do these tires perform on different surfaces?
The B1 rubber compound is designed to provide consistent traction across multiple surfaces. On hard-packed trails, the micro pin tread digs in for cornering grip, while on loose overburden the pins clear debris to maintain forward bite. The smaller front tires (34x11mm) reduce scrub radius for sharper steering, while the larger rears (35x17.8mm) add rear-end stability under power.
Specifications
| Front tire size | 34mm diameter, 11mm width |
| Rear tire size | 35mm diameter, 17.8mm width |
| Wheel hex size | 7mm |
| Weight per tire (front) | 4g |
| Weight per tire (rear) | 5.3g |
| Wheel type | One-piece nylon, scale-inspired design |
| Compound | B1 high-traction rubber |
| Tread pattern | Micro pin |
| Includes | 4 pre-mounted tires with foam inserts |
Will these fit my Losi Micro-B?
Yes. These wheels use the standard 7mm hex that comes on the 1/24 Losi Micro-B. The pre-mounted assembly bolts directly onto the stock axles without modification. The staggered front/rear sizing matches the original geometry for balanced handling.
Are the wheels and tires reusable?
The tires are molded onto the wheel, so they are not intended to be removed. However, the whole assembly can be taken off and swapped between sets. The foam inserts are separate and can be replaced if they compress over time.
What colors are available?
This set comes with yellow wheels. INJORA also offers white and magenta options for the same tire design, so you can color-match your build.