CHANCS JS-50 DC Geared Motor 6V 5RPM with POM Plastic Gears for Fans, Displays, and Vending Machines
CHANCS JS-50 DC Geared Motor 6V 5RPM with POM Plastic Gears for Fans, Displays, and Vending Machines
The CHANCS JS-50 DC geared motor runs on 6V DC and delivers a slow 5 revolutions per minute. Its iron shell houses injection-molded POM plastic gears that resist wear and keep noise low. With a torque rating up to 10 kg·cm, this motor is built for applications like electric fan wind guides, display turntables, vending machines, and microwave oven turntables. The shaft measures 7mm in diameter and 15.5mm (or 15mm) in length, with an M4 threaded hole.
How does the JS-50 geared motor perform?
At no load, the motor draws about 35mA; under locked-rotor conditions, current rises to 265mA. Power output is 2W. The motor can rotate both clockwise and counterclockwise. Note that higher speed results in lower torque and relatively quieter operation. Always use a DC 6V power supply—AC voltage will not work, and exceeding 6V can damage the motor.
Technical specifications
| Shaft Diameter | 7mm (0.28") |
| Shaft Length | 15.5mm (0.61") / 15mm (0.59") |
| Shaft Thread Hole Inner Diameter | φ3.4mm (M4) |
| Overall Size | 50×50×34mm (1.97"×1.97"×1.34") |
| Working Voltage | DC 6V |
| Speed | 5 r/min |
| Power | 2W |
| No-Load Current | 35mA |
| Locked-Rotor Current | 265mA |
| Torque | ≤10 kg·cm |
| Rotation | CW/CCW |
Note: There may be slight measurement discrepancies; verify before ordering.
What are common applications for this motor?
This JS-50 motor is designed for direct current devices such as electric fan wind guide mechanisms, oscillating heads, heaters, display stands, arts and crafts, lighting fixtures, toys, automatic doors and windows, vending machines, automatic barbecue grills, medical equipment, air conditioning fan guides, and microwave turntables.
Commonly asked questions
Can I use this motor with an AC power supply?
No. This motor requires DC 6V. AC power will not operate it, and using a voltage higher than 6V can burn out the motor. If unsure about your power source, ask customer service before purchasing.
Does the motor support both rotation directions?
Yes, it operates both clockwise (CW) and counterclockwise (CCW).
Can the shaft or voltage be customized?
Yes, the manufacturer can design the motor shaft, line length, speed, and voltage per your requirements. Contact them via email for custom orders or bulk/OEM inquiries.
What material are the gears made of?
The gears are injection-molded from high-quality POM plastic, which is wear-resistant, low-noise, and resistant to deformation.